Boaters' Resale Shop of TX 2404 2544.05 RULE 8000 TWIN SUBMERSIBLE 12VDC PUMPS

Boaters' Resale Shop of TX 2404 2544.05 RULE 8000 TWIN SUBMERSIBLE 12VDC PUMPS FORMAT * 6 FOOT POWER CABLES with CLAMPS & 3" x 10' HOSE INCLUDED IF NEEDED * SEE ALL 6 PHOTOS * SOLD AS PICTURED * ITEM WAS PREOWNED, USED, IS IN FAIR PHYSICAL CONDITION AND APPEARS TO BE OPERATING PROPERLY, BOTH PUMPS POWERS UP AND SUCTION IS PRESENT BUT HAS NOT BEEN TESTED FURTHER **(PLEASE LET US KNOW IF YOU WILL REQUIRE THE HOSE BECAUSE IT WILL ADD WEIGHT AND DIMENSIONS TO THE SHIPPING COST)**

* APPROX. TWIN PUMP ASSEMBLY DIMENSIONS: 6" D x 8" H x 12" L
* APPROX. TWIN PUMP ASSEMBLY WEIGHT: 11 LBS.
* APPROX. 3" x 10' HOSE DIMENSIONS: 3" x 22" x 22" (IF NEEDED)
* APPROX. HOSE WEIGHT: 3.5 LBS
Rule 8000
Submersible pump 12 volt DC.
This product is now obsolete.
The details supplied here are for information only.
Discontinued - No replacement model
Connections: For 75mm (3") bore hose.
Dimensions: 197mm high, 305mm wide.
Fuse Size: 2 x 25(amp)
Output: Up to 505 litres/minute (111 gallons/minute). Max. recommended discharge head 4m
High capacity pump for larger vessels.
Twin pump format.
Built-in back-up: each pump can operate independently if necessary.
Replacement motor modules available.
Ignition protected.
For automatic operation use Rule Float Switch.
Note: 2 relay switches required. We recommend each module is wired and fused separately.
Packaged Dimensions: L:32.00 x H:29.00 x W:18.00cm
Actual Weight: 5.78 Kg (Approx. 6.78 Kg packed)