Estimate Shipping Cost
Details
Boaters' Resale Shop of TX 2407 5572.07 MSR 12 VOLT FAN HEATER ASSEMBLY 914FF with 7/8" ADAPTERS ON 3/4" WATER HOSE PORTS * SEE ALL 6 PHOTOS * SOLD IN CONDITION PICTURED * ITEM WAS PREOWNED, USED, IS IN FAIRLY GOOD PHYSICAL CONDITION AND APPEARS TO BE OPERATING PROPERLY, FAN POWERS UP BUT HAS NOT BEEN TESTED FURTHER
APPROX. DIMENSIONS:
* HEIGHT: 5.75"
* LENGTH: 7.75"
* DEPTH: 13.5"
* WEIGHT: 6 LBS
* TWO 7/8" PLASTIC HOSE PORTS ATTACHED TO 3/4" COPPER PORTS
.Similar equipped as the Models 005-905FF and 914FF for in-field fan motor and air outlet air swap. These FF Models can also be rotated 180 degrees, so the top becomes the bottom for water hose routing without the need for hose cross over. Dual air vent fittings allow this feature. The Models 905FF, 914FF and 919FF are all equipped with a five pass water coil for superior water flow and heat output.
Standard 3/4″ FPT connections ADAPTED TO 7/8" PORTS
Height: 5.75”
Width: 7.75”
Depth: 11.5”
Low amperage or high capacity defrost fan 12VDC
APPROX. DIMENSIONS:
* HEIGHT: 5.75"
* LENGTH: 7.75"
* DEPTH: 13.5"
* WEIGHT: 6 LBS
* TWO 7/8" PLASTIC HOSE PORTS ATTACHED TO 3/4" COPPER PORTS
.Similar equipped as the Models 005-905FF and 914FF for in-field fan motor and air outlet air swap. These FF Models can also be rotated 180 degrees, so the top becomes the bottom for water hose routing without the need for hose cross over. Dual air vent fittings allow this feature. The Models 905FF, 914FF and 919FF are all equipped with a five pass water coil for superior water flow and heat output.
Standard 3/4″ FPT connections ADAPTED TO 7/8" PORTS
Height: 5.75”
Width: 7.75”
Depth: 11.5”
Low amperage or high capacity defrost fan 12VDC
Specifications
Condition | Used |
---|---|
Brand | MSR |
Manufacturer Part Number | 914FF |
Condition Description | SEE ALL 6 PHOTOS * SOLD IN CONDITION PICTURED * ITEM WAS PREOWNED, USED, IS IN FAIRLY GOOD PHYSICAL CONDITION AND APPEARS TO BE OPERATING PROPERLY, FAN POWERS UP BUT HAS NOT BEEN TESTED FURTHER |